ASTM D1238 – Melt Flow Rate of Thermoplastics
ASTM D1238 is a standard test method for measuring the melt flow rate (MFR) of thermoplastic materials by extrusion plastometer. A measured amount of material is heated to a set temperature, pushed through a small die under a fixed load, and the mass that flows out in ten minutes is reported in grams per 10 minutes. The result gives a quick, repeatable indication of how easily a plastic flows when molten.
Watch: ASTM D1238: What Does Melt Flow Rate Tell You? (Melt Flow Testing)
本视频中的示例画面由人工智能生成。
Short: Higher melt flow is always better? ASTM D1238 in under a minute
How to read a melt flow result
- A higher melt flow rate means the material flows more easily. A lower rate means it is stiffer when molten.
- Higher is not automatically better. The right value depends on the process (for example injection molding versus extrusion) and the part.
- Results are only comparable when the temperature and load are the same. Always check the test conditions on a data sheet before comparing two grades.
- Melt flow rate is a screening and quality-control number. It does not predict final part strength or service life on its own.
观看我们的 橡胶测试视频库. For plastic strength, see ASTM D638 tensile properties.
需要定制模压橡胶或塑料零件？请将您的图纸和要求发送至 estimator@coirubber.com 或者 联系我们的团队。COi Rubber由美国拥有并运营，我们位于中国芜湖的制造工厂已通过IATF 16949认证。